It’s estimated that about three out of four projects in the coatings world will fail due to improper surface preparation. Properly prepping your surface before applying coatings is the key…
One of the most common questions we receive is “why do I have bubbles in my floor coating?”. When you boil it down, there are five common mistakes that…
Question: “We have used the Z-Poxy on our floors but now want to continue up the wall to create an epoxy cove base. Can this be done with the product as-is?” Answer:…
Question: “Our plant has some pretty bad damp and damaged floors. We need to put a sealer down, but first there are some holes we need to patch. Our problem…
Question: “We really love using Z-Poxy, but it takes too long to cure. We need to get traffic back on the floor as quick as possible. Do you have a quick-drying…
Patching concrete that is oil-saturated or always damp is a pain. Most flooring products state that the area must be clean and dry before applying, so what are you supposed…
Question: “We are a local energy facility and our coal chutes take a beating. We have tried using a ceramic epoxy putty to repair the problem areas, but this product…
Question: “We have a lot of carbon dust on our floor from grinding and blending pigments. We need a coating that will resist the effects of the dust in our…