Browse By Task | Tri-Chem
Products You Can Depend On
Browse By Category  Browse By Task  See All Products 

Listing Products for: Surface Protection.

  •  

    Acrylock

    3 products (click for details)

    Acrylock is a metal, cross-linked acrylic co-polymer finish for asphalt tile, vinyl tile, rubber tile, linoleum, terrazzo, wood block and concrete floors.
  •  

    Grab It

    PART #: GRABIT

    Grab It is a 100% solids special epoxy designed as a long wearing, high friction surface for fork lift forks. This two part product with aggregate creates friction enabling fork lifts...
  •  

    Oily Floor Primer

    3 products (click for details)

    Oily Floor Primer is a concrete floor sealer/primer for use on floors contaminated with animal fat, cutting coolant, transmission fluid, etc
  •  

    Oily Floor Primer Color

    3 products (click for details)

    Oily Floor Primer is a concrete floor sealer/primer for use on floors contaminated with animal fat, cutting coolant, transmission fluid, etc
  •  

    Oily Floor Primer Fast Cure

    PART #: OFPFC

    Oily Floor Fast Cure Color is a concrete floor sealer/primer/color top coat for use on floors contaminated with animal fat, cutting coolant, transmission fluid, etc. That cures in 30 minutes.
  •  

    Peel It White

    PART #: PEELW05

    Peel It White is a temporary, strippable, protective floor coating formulated for maintenance of industrial floors; protects floors from build-up of inks, spray track adhesives, paint...
  •  

    Protect 'N Seal

    2 products (click for details)

    Protect 'N Seal is a penetrating sealer and conditioner that is highly resistant to abrasions, impact, acids, alkali, fumes, gases, oil, grease, gasoline, ink, fruit juices, cleaning...
  •  

    Pool & Storage Tank Epoxy Coat

    PART #: PS909

    Pool & Storage Tank Epoxy Coat is a premium two-part catalyzed epoxy with exceptionally high gloss, hardness, and overall performance. Pool & Storage Tank Epoxy Coat has a tile-like...
  •  

    Protect 'N Seal UMS

    2 products (click for details)

    PROTECT 'N SEAL U.M.S is a penetrating sealer that penetrates, seals and conditions concrete and terrazzo against wear, stains, grease and extraneous moisture. PROTECT 'N SEAL U.M.S. seals...
  •  

    PROTECT N SEAL UMS (HI SOLIDS)

    PART #: PSUMSHS05

    PROTECT 'N SEAL U.M.S is a penetrating sealer that penetrates, seals and conditions concrete and terrazzo against wear, stains, grease and extraneous moisture. PROTECT 'N SEAL U.M.S. seals...
  •  

    Protect 'N Seal WBU

    2 products (click for details)

    Protect N Seal WBU is a water emulsion, clear urethane sealer that seals and hardens old, as well as new, concrete and terrazzo and incorporates a durable film within the concrete that...
  •  

    Rust Guard LV

    36 products (click for details)

    RUST GUARD LV provides a tough chemical resistant coating for masonry, wood or metal. Use on interior or exterior metal, interior wood, plaster or masonry. Can be used for striping & line marking.
  •  

    Rust Converter

    2 products (click for details)

    This new surface conditioner and primer changes rust in to a dark protective polymeric coating; i.e., converts existing rust to an inert coating that seals out moisture to prevent future...
  •  

    Tri-Epoxy Water

    18 products (click for details)

    This waterborne 2 part pigmented epoxy is pre-measured and formulated to provide a tough concrete seal and finish to protect against chemical penetration (including brake fluids) and...
  •  

    Tri-Water Shield

    2 products (click for details)

    Tri Water Shield is a clear, long lasting penetrating waterproofing seal for use on a variety of surfaces including wood, concrete, stucco, brick, block, tile and canvas that increases...
  •  

    Tri-Water Shield II

    PART #: TWSII01

    Tri Water Shield is a clear, long lasting penetrating waterproofing seal for use on a variety of surfaces including wood, concrete, stucco, brick, block, tile and canvas that increases...
  •  

    Tri-Water Shield Paint Additive

    2 products (click for details)

    Tri Water Shield Paint Additive is a water-based, one component liquid silicon rubber dispersion paint additive that, when added to any water-based paint, increases paint adhesion,...
  •  

    Z-Poxy FR

    PART #: ZPFRSKLG

    Z-Poxy FR is a 100% solids epoxy coating designed to have a minimal flame spread and smoke developed index. This product is used for those facilities that require surface burn characteristics...
  •  

    Z-Poxy HP Novalac

    PART #: ZPHPSK

    Z-POXY NOVOLAC FLOOR COATING is a high-build, 100% solids Novolac epoxy coating. It provides resistance to harsh chemicals, including sulfuric acid, and can be used as a topcoat over...
  •  

    Z-poxy

    36 products (click for details)

    Z-Poxy is a super strength coating and sealer for high traffic floors. Excellent for containment areas, especially when an acid and chemical resistant coating is required. Use Z-Poxy...
  •  

    Z-Poxy Fast set

    17 products (click for details)

    Z-Poxy Fast Set is a high strength, fast setting coating and sealer for high traffic floors. Excellent for containment areas, especially when an acid and chemical resistant coating...

Save time & money
let us install
your next
flooring project

Learn more

Need Help?
Call Us

1-800-456-6255

Featured
Products