Moisture Lock Out is a moisture barrier treatment that, when applied to electric or electronic surfaces, drives out absorbed water and moisture and replaces it with a thin molecular film that seals to all surfaces. Moisture Lock Out protects against further corrosion from moisture, water, salt, air, corrosive fumes, ammonia gases, etc. Moisture Lock Out will allow a motor to run under water. Available in aerosol or bulk.

• AERTMD – case of 12 - 16 oz. cans
• TMD05 – 5 gallon pail
• TMD55 – 55 gallon drum

MSDS Sheet
Label
Tech Sheet