Tri-Chem Corporation | 800-456-6255 | About Tri-Chem|Contact Us|Search
 
You need to upgrade your Flash Player This is replaced by the Flash content.

Now In: SafetyIndustrial Floor Matting → Electro-Static Discharge Tri-Mat

 

Electro-Static Discharge Tri-Mat

 E-mail this product to a friend

previous | up | next 

The World's Leading Electro-Discharge Mat

This product was designed for protection against Electo-Static Discharge. The rubber mat is conductive for a rapid discharge to ground. These anti-fatigue mats are scientifcally and ergonomically designed to reduce strains, pains, and worker's compensation claims related to prolonged standing.

ESD Material
EDP#
22" x 3' E10000
36" x 30" E10001
36" x 5' E10002
*The above sizes can be cut to a custom width and length.
Runners available in 3' width.
Factory bonded every 5' or when necessary.


Features:
  • Works well in all areas, great in wet or oily applications. Closed cell feature eliminates absorption of liquids and fluids.
  • Very user friendly, light weight, easy to clean.
  • National Floor Safety Institute approved, non-slip quality tested 40% higher than any other sponge mat.
  • Non-allergenic, latex and silicone free.
  • Tri-Mats are complete with safety bevel, all service carts roll over our mats with ease.
Benefits:
  • Promotes employee wellness.
  • Immediate increase in productivity and employee morale due to work place comfort.
  • Guaranteed increased of exposure to prolonged cold, heat and vibration.
  • Reduces spinal compression.
  • Increases circulation.
  • Ergonomically designed guaranteed reduction of back, leg, foot, and ankle fatigue.
Adiitional usage areas:
  • Automotive manufacturing
  • Assembly lines
  • Chemical plants
  • Furniture manufacturers
  • Service counters
  • Shipping & recieving mats
  • Factory and fabrication
  • Mechanic areas
  • Steel factory
  • Bucket trucks
  • Parts manufacturing
  • Clean room applications
  • Computer manufacturers
  • Computer equipment repair
  • Cellular phone manufacturers
  • Electronic production and repair
  • And many more usage areas for standing workers
  • Graphic arts
  • Ammunition manufacturers
  • Electrical equipment
  • Semi conductor manufacturing
3/8" Male or Female grounding snaps are available
upon request. Grounding cord not supplied.

Grounding Snaps
E10003 - M
E10003 - F


Colors:
  • Comes in Black only.
Non-Slip Properties:
  • Excellent
  • Wet or dry applications
  • Oily and slippery surfaces
  • NFSI tested and approved
Edge:
  • Beveled on all sides for ease of cart traffic and added safety.
Warranty:
  • The ESD is guaranteed against defects in materials and workmanship for two years. Including premature wear.
  • Life expectancy 3-8 years.
Patterns:
  • Original aggressive top and bottom for oily areas.
Chemical Resistance:
  • Excellent
  • The Tri-Mat mat will not be affected by petroleum products or chemicals.
  • We will proudly provide samples for testing.
Cleaning:
  • Very light weight, easy to lift and clean. Can be cleaned with MULTI-TRI cleaner ( to be used in steam cleaning applications) or use BULLDOZER acid base cleaner ( not to be used in steam cleaner applications).
  • Maximim temperature of 250 degree.
  • For disinfectant cleaning folow your normal protocol.
Raw Material:
  • Fabricated from superior closed cell virgin nitrile rubber.
Thickness and sizes:
  • Approximately 5/8"
  • All mats are approximate in size + or - to 1". Sponge products are not zero tolerance materials due to expansion and contraction.
Please Note: Tri-Mat has been specifically designed to ruduce the risk of slips and falls, while increasing safety and comfort in teh work place. Tri-Chem accepts no responsibility for damages involving the use of our products. No products can guarantee that accidents will not happen. Suitability to task and operations in all aspects must be determined by the user of the mat.
Physical and Electrical Specifications:
Closed cell non absorbent
Resistance point to point, bottom layer, same..........5 x 105 OHMS
Charge decay time, 5000 volts to 100 volts,
FTMS 101C, Method 4046...................................<0.01 Seconds
Durometer, Shore 00, ASTM D-2240.........................50 Seconds
Burn Test, UL94HBF.........................................................Passed
Extinguished in 10 sec., burned 1/4"



 

 

 

 

Call us at 800-456-6255...

No Answering Machines or Automated Systems.
Actual People on the other end of the line that can answer all of your:
  • Facility Maintenance
  • Tooling
  • Floor Coating, Patching and Sealing
  • & Safety equipment...Questions.

Guaranteed!

Terms & Conditions | FAQs | Privacy | Copyright Tri-Chem 2007 | 800-456-6255