Now In: Tools → Die Holders → Threadex® – Floating Die Holder
|
- SIMPLE - Cut threads on any lathe fitted with a Morse Taper tail stock
- ACCURATE - Improves thread quality with fewer part rejections over hand held method
- FASTER - 4 to 5 times faster than threading with a single point tool
- SAFE TO USE - Reduces chance for operator injury
| HEADS |
Fits Die
O.D. |
Accepts
Morse
Taper |
Max.
Thread
Length |
Head
Number |
EDP
No. |
| 1 |
2 |
2-3/8 |
FDH1-2 |
303033 |
| 1 |
3,4 |
3 |
FDH1-34 |
303034 |
| 1-1/2 |
3,4 |
3 |
FDH15-34 |
303035 |
| 2 |
3,4 |
3 |
FDH2-34 |
303036 |
| SHANKS |
Morse
Taper
Number |
Fits Head Number |
Shank
Number |
EDP
No. |
| 2 |
FDH1-2 |
FDHS-2T |
303037 |
| 3 |
FDH1-34, FDH15-34, FDH2-34 |
FDHS-3T |
303038 |
| 4 |
FDH1-34, FDH15-34, FDH2-34 |
FDHS-4T |
303039 |
Threadex® Operating Instructions:
- Step 1: Select the appropriate Morse Taper Shank - 2, 3, or 4 - to fit lathe tail stock.
- Step 2: Select the head to fit the desired die O.D. Insert shank into lathe tail stock.
- Step 3: Slide head onto shank with die mounted into head by set screws. (Be careful not to overtighten set screws; deformation of the threads on the die may result.)
- Step 4: Loosten tail stock and advance toward work piece until die engages work piece.
- Step 5: Lock tail stock and advance holder with tail stock crank until head begins to self feed.
- Step 6: Reverse at desired length of thread and head will back off threaded part.
|
Additional Product info
Our Catalog Page: 7
